I cant get UT2004 to run smoothly. I have an Athlon64 FX55 and a GeForce 6800GT and 1gig RAM, so apart from the g/card the PC is top end. The framerate doesn't drop much when I turn up the detail but even with the frames at 70+ it feels jerky all the time. If I play offline it runs better but not as smooth as Unreal1.
Whats the chipset of your motherboard.
I have in the past seen the same type of thing.
Came down to the fact the mobo didnt have enough bandwidth.
Also not a big enough psu has caused the same type of errors.
Do you have the same problem with any other modern game.(2003+)
}TCP{Cheshire wrote:
Perhaps u cal also try to up your netspeed a bit
Perhaps it is still on the lowest setting .. might help
excellent thanks
}TCP{SLAPHEAD wrote:
Whats the chipset of your motherboard.
I have in the past seen the same type of thing.
Came down to the fact the mobo didnt have enough bandwidth.
Also not a big enough psu has caused the same type of errors.
Do you have the same problem with any other modern game.(2003+)
its VIA one of those tweakable Abit gamers boards with a 500w psu
Via!
If its a 800 or 880 chipset then you should be ok.
This is equivalant to Nforce 2 chipset,but still alittle underspec.
If it is a Via 600,400 then that is your problem.
FX chips and 6800 use alot of power.
A very good make 600watt psu would be the lowest psu recommended
for such hardware.
You need to try other games,even if it just demos.
Frycry,Fear,HL2.
Or download Nvidias own demos....Luna...etc
